A web interface for local network interface is not provided. Additional note: If you have found a web interface: this is not from BYD, but from the manufacturer of the Wifi module and should not be visible. BYD has not provided a local web interface. Please ignore the web interface of the Wifi module manufacturer to avoid accidentally changing network parameters that may be relevant for operation.
Configuration is performed exclusively via Wifi. Via smartphone app "Be Connect" or PC app "Be Connect plus". The PC tool including PDF instructions can be found here:
https://docs.eft-systems.de/download/DOC-00043&_lang=en
The Wifi is only for commissioning and service and switches off automatically after 5 hours with the latest firmware. To reactivate it, press the power button for one second. Alternatively, restart the battery. To reset the Wifi, press the LED key three times for 1 second within 6 seconds.
Otherwise, the following tip: If you need to access the WLAN to configure the battery, then it is best to disconnect the LAN cable between the battery and the router/switch for the duration of the WLAN connection. After the battery has been properly configured, you can reconnect the BCU to the internet.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article